Post by ImGoingSpace on Jul 15, 2013 11:50:45 GMT
afternoon gents, i figure i should add to the gear threads, although i dont really hope to copy any real unit ect. just go for the practicality rather then the look.
RIFs:
G&G TR16 R5 Gen.1 (M16a3)
Internally, all ive done is swapped the spring to an M90, swapped the hop unit, rubber and barrel to Madbull. and the motor to an SHS High Torque.
externally, back to front,
Arktis Stock Mag Pouch
Element Sniper M4 Grip
AG-K Elcan SpectreDR 1-4x
pair of G&G Rail Covers
Element Surefire M951 (or 952v)
ICS Birdcage Flash Hider and QD (Long) Supressor.
(That Masterkey is a DE M56B Sawnoff, more later on that)
APS UAR (Urban Assault Rifle)
this fancy little thing is currently in bits getting worked on by a friend as i kinda broke it. a lot.
but nevertheless;
internally it (had) been shimmed, AOE corrected (with Sorbo). also swapped the motor for an SHS High Speed. i also dropped a guarder hop rubber in it with a biro nub.
externally, its pretty simple.
ACM EOTech 552
ACM AK Folding Grip
an Element M952v (or 951, whichever isnt on the m16)
it also has a King Arms 110x30 Suppressor (torch is in the way
).
JG G608.1 (G36k Ras)
first Rif i owned, got this 5 years ago. its pretty bog standard really.
internally, swapped the motor for a G&P M120, and the hop rubber to a madbull blue.
i made a small mod to the hop unit when it broke (only thing that has broken on it!), making an impromptu fixed Hop, which amazingly works wonders.
Externally, <INSERT COMMENTS AND IMAGE>
Well/Warrior MB-01
I think everyone has had one of these at some point, i simply bought it as a project.
Internally, it has a Laylax Silent Piston (with extra Sorbo), a PDI Airseal Type 96 Hop unit with a PDI Rubber. the barrel is now a G&G 6.04 509mm (from my TR16)
Externally its got a Richter Optiks 3-9x40 scope, acm harris bipod and a Swiss Arms Overbarrel Silencer.
with all this fancy sound reduction (im cosidering filling the stock with foam to make it quieter) its around 65Db
(and at 470fps)
oh and a fancy camo job done by Just Cause Airsoft's Camo Dpt.
DE M56B
Not much to say here, got this in a trade for a Mich 2000 repro with the intent of making a masterkey. and as you can see that plan worked well. ive done next to nothing to it, but i do like attaching random bits to it.
last i used it (private game at the mall) it had one of my surefires bolted to the pump and an eotech on top. and a makeshift mount for a magpul MS2 sling (not Shown).
TM 1911 MEU (custom sorta)
i bought this to replace my KWA G18, originally it was a Foliage warrior, although all that remains of that is the lower frame and MSH
one of the first things i did was replace the slide (and all the 4.3" parts) with a Night Warrior Slide and Nineball Parts (rubber and barrel), at which time i bent the hop arm to apply more hop (to allow the use of up to .36g).
swapped out the trigger for an adjustable one, and the hammer for a davidson custom, which i then set all the sears to have no play in the trigger (fires in the first mm or so of trigger travel). it currently has no torch as i sold the M3 pictured and broke the M300a i replaced it with.
EDIT: oh and extended controls (slide Catch ect)
(Suppressor is for lols)
RIFs:
G&G TR16 R5 Gen.1 (M16a3)
Internally, all ive done is swapped the spring to an M90, swapped the hop unit, rubber and barrel to Madbull. and the motor to an SHS High Torque.
externally, back to front,
Arktis Stock Mag Pouch
Element Sniper M4 Grip
AG-K Elcan SpectreDR 1-4x
pair of G&G Rail Covers
Element Surefire M951 (or 952v)
ICS Birdcage Flash Hider and QD (Long) Supressor.
(That Masterkey is a DE M56B Sawnoff, more later on that)
APS UAR (Urban Assault Rifle)
this fancy little thing is currently in bits getting worked on by a friend as i kinda broke it. a lot.
but nevertheless;
internally it (had) been shimmed, AOE corrected (with Sorbo). also swapped the motor for an SHS High Speed. i also dropped a guarder hop rubber in it with a biro nub.
externally, its pretty simple.
ACM EOTech 552
ACM AK Folding Grip
an Element M952v (or 951, whichever isnt on the m16)
it also has a King Arms 110x30 Suppressor (torch is in the way
).JG G608.1 (G36k Ras)
first Rif i owned, got this 5 years ago. its pretty bog standard really.
internally, swapped the motor for a G&P M120, and the hop rubber to a madbull blue.
i made a small mod to the hop unit when it broke (only thing that has broken on it!), making an impromptu fixed Hop, which amazingly works wonders.
Externally, <INSERT COMMENTS AND IMAGE>
Well/Warrior MB-01
I think everyone has had one of these at some point, i simply bought it as a project.
Internally, it has a Laylax Silent Piston (with extra Sorbo), a PDI Airseal Type 96 Hop unit with a PDI Rubber. the barrel is now a G&G 6.04 509mm (from my TR16)
Externally its got a Richter Optiks 3-9x40 scope, acm harris bipod and a Swiss Arms Overbarrel Silencer.
with all this fancy sound reduction (im cosidering filling the stock with foam to make it quieter) its around 65Db
(and at 470fps)oh and a fancy camo job done by Just Cause Airsoft's Camo Dpt.
DE M56B
Not much to say here, got this in a trade for a Mich 2000 repro with the intent of making a masterkey. and as you can see that plan worked well. ive done next to nothing to it, but i do like attaching random bits to it.
last i used it (private game at the mall) it had one of my surefires bolted to the pump and an eotech on top. and a makeshift mount for a magpul MS2 sling (not Shown).
TM 1911 MEU (custom sorta)
i bought this to replace my KWA G18, originally it was a Foliage warrior, although all that remains of that is the lower frame and MSH
one of the first things i did was replace the slide (and all the 4.3" parts) with a Night Warrior Slide and Nineball Parts (rubber and barrel), at which time i bent the hop arm to apply more hop (to allow the use of up to .36g).
swapped out the trigger for an adjustable one, and the hammer for a davidson custom, which i then set all the sears to have no play in the trigger (fires in the first mm or so of trigger travel). it currently has no torch as i sold the M3 pictured and broke the M300a i replaced it with.
EDIT: oh and extended controls (slide Catch ect)
(Suppressor is for lols)
